QSI 520c Betriebsanweisung PDF herunterladen (Seite 44)

QSI 500 SERIES USER GUIDE

If you don’t see “QSI Universal” listed in the Main CCD Camera field, click the “Setup”

button in the upper left corner under Main CCD Camera. The window below will open.

Select “QSI Universal” from the pop-up menu. Click OK.

That will take you back to the Camera Control Window. Click the “Connect” button to

establish communication between MaxIm and your QSI camera. If MaxIm connects

properly the Camera Control window will look like this:

Note that the current temperature of the CCD is displayed in the “Main CCD Camera” field

toward the upper left of the Camera Control window. The “Setpoint” is the temperature that

camera will cool the CCD to, and may be different than shown above.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 86 87

500 Series User Guide 1
Table of Contents 2
Getting Started 4
What’s In the Box? 5
Get to Know Your Camera 6
Install Software and Drivers 7
Connect the camera 8
Take an image 10
QSI 500 SERIES USER GUIDE 11
Camera Attachment Options 12
Using SLR Lenses 13
Electrical Connections 14
Cooling the Camera 17
Internal Color Filter Wheel 21
Advanced Setup Options 22
Imaging Options 25
Other Options 25
Enable Pixel Masking 26
Status and Notification 28
CCD Imaging Overview 31
Interline Transfer CCDs 32
Anti-Blooming CCDs 32
Microlenses 33
Single-shot color CCDs 33
Signal versus noise 34
Reducing noise in CCD images 35
6-minute Dark Frame 36
Original image 37
Flat Fields 37
Bias Frames 39
Stacking Images 40
Color images 41
Taking Images with your 42
QSI 500 Series Camera 42
Camera Control Window 43
Cool the CCD 45
Focusing with MaxIm LE 46
Take a single image 47
View the image in MaxIm LE 48
Take a series of images 48
Image Calibration 50
Dark Frames 51
Manual Image Calibration 52
Scale by Flat Fields 54
Calibrate Images in MaxIm LE 59
Combine Frames in MaxIm LE 60
Combined image of M78 62
Binning 63
384x256 64
Shutting down your camera 67
Guiding 68
Using an AutoGuider 69
Accessories 74
SLR lens adapter 75
Liquid heat exchanger 75
Recirculating pump 75
Color filter wheel 75
Care & Maintenance 76
Cleaning the color filters 78
Cleaning the CCD cover glass 78
Updating the Firmware 78
Recharging the desiccant 80
Technical support 81
C-mount adapter 82
Model 504 CCD Specifications 83
Model 516 CCD Specifications 83
Model 532 CCD Specifications 84
Model 520 CCD Specifications 84
Model 540 CCD Specifications 85
Model 583 CCD Specifications 85
Appendix B – Warranty 86

Kommentare zu diesen Handbüchern

Keine Kommentare

QSI 520c Betriebsanweisung Seite 44

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras QSI 520c