QSI 520c Betriebsanweisung Seite 29
- Seite / 87
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
QSI 500 SERIES USER GUIDE
Camera Soft Error State Indication
Flash Red: 1
Flash Yellow: 1 The camera is over-temperature. Camera has exceeded the
40°C maximum recommended operating temperature for the
internal electronics and enclosure. This sequence will repeat
every four seconds as long as the camera remains “over-
temperature”.
Flash Red: 1
Flash Yellow: 2 The CCD is under-temperature. The CCD has exceeded the
-40°C minimum recommended operating temperature. This
sequence will repeat every four seconds as long as the CCD
remains “under-temperature”.
Flash Red: 1
Flash Yellow: 3 The camera DC supply voltage is below the 11V minimum
recommended operating level. This sequence will repeat
every four seconds until the supply voltage is raised above
this threshold.
Flash Red: 1
Flash Yellow: 4 The camera DC supply voltage is above the 14V maximum
recommended operating level. This sequence will repeat
every four seconds until the supply voltage is lowered below
this threshold.
Flash Red: 1
Flash Yellow: 5 The filter wheel has encountered a problem and is no longer
operational. The camera will still function, but will no longer
attempt to move the filter wheel. The filter wheel may be in
any position. Power to the camera must be turned off and on
to reinitialize the filter wheel.
Flash Red: 1
Flash Yellow: 6 The shutter has encountered a problem and is no longer
operational. The camera will still function, but will no longer
attempt to operate the shutter. The shutter may be in any
state. Power to the camera must be turned off and on to
reinitialize the shutter.
Hard errors occur when the USB communication channel to the computer malfunctions or
the camera has an unrecoverable internal error. The power to the camera must be turned
off and on to reinitialize the camera and USB connection to the computer. This class of error
is generally caused by problems with the USB connection between the camera and
computer or software and firmware version incompatibility. Hard errors always begin with
two Red flashes followed by a number of Yellow flashes.
26
- 500 Series User Guide 1
- Table of Contents 2
- Getting Started 4
- What’s In the Box? 5
- Get to Know Your Camera 6
- Install Software and Drivers 7
- Connect the camera 8
- Take an image 10
- QSI 500 SERIES USER GUIDE 11
- Camera Attachment Options 12
- Using SLR Lenses 13
- Electrical Connections 14
- Cooling the Camera 17
- Internal Color Filter Wheel 21
- Advanced Setup Options 22
- Imaging Options 25
- Other Options 25
- Enable Pixel Masking 26
- Status and Notification 28
- CCD Imaging Overview 31
- Interline Transfer CCDs 32
- Anti-Blooming CCDs 32
- Microlenses 33
- Single-shot color CCDs 33
- Signal versus noise 34
- Reducing noise in CCD images 35
- 6-minute Dark Frame 36
- Original image 37
- Flat Fields 37
- Bias Frames 39
- Stacking Images 40
- Color images 41
- Taking Images with your 42
- QSI 500 Series Camera 42
- Camera Control Window 43
- Cool the CCD 45
- Focusing with MaxIm LE 46
- Take a single image 47
- View the image in MaxIm LE 48
- Take a series of images 48
- Image Calibration 50
- Dark Frames 51
- Manual Image Calibration 52
- Scale by Flat Fields 54
- Calibrate Images in MaxIm LE 59
- Combine Frames in MaxIm LE 60
- Combined image of M78 62
- Binning 63
- 384x256 64
- Shutting down your camera 67
- Guiding 68
- Using an AutoGuider 69
- Accessories 74
- SLR lens adapter 75
- Liquid heat exchanger 75
- Recirculating pump 75
- Color filter wheel 75
- Care & Maintenance 76
- Cleaning the color filters 78
- Cleaning the CCD cover glass 78
- Updating the Firmware 78
- Recharging the desiccant 80
- Technical support 81
- C-mount adapter 82
- Model 504 CCD Specifications 83
- Model 516 CCD Specifications 83
- Model 532 CCD Specifications 84
- Model 520 CCD Specifications 84
- Model 540 CCD Specifications 85
- Model 583 CCD Specifications 85
- Appendix B – Warranty 86
Verwandte Produkte und Handbücher für Sicherheitskameras QSI 520c
Sicherheitskameras QSI 516 Betriebsanweisung
(89 Seiten)
(89 Seiten)
Sicherheitskameras QSI 520c Betriebsanweisung
(82 Seiten)
(82 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.141 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern